Önce bu simgeye, daha sonra "Ana Ekrana Ekle" seçenekleri tıklayarak Neutron'a kısayol oluşturabilirsiniz.
Ürün Kodu: NSW2010-5T-POE-IN

 5×10/100Mbps Ethernet ports

 4 10/100Mbps ports support PoE

 PoE complies with IEEE802.3af/at, up to 30W for single port

 Up to 250m transmission distance on EXTEND mode

 Easy to use, no need to configure

 High quality with all metal housing

 Lightning Protection 6KV

Item Description
Ports 5×10/100Base-TX autosensing Ethernet ports(4 10/100Mbps ports support PoE)
Port attribute 10/100 Mbit/s transfer rate
Half-duplex, full-duplex and auto-negotiation
Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3af
IEEE 802.3at
Packet forwarding rate 0.74Mpps
Switching capacity 1Gbps
EXTEND mode Standard: the switch functions as a common unmanaged switch and all the ports of the switch can communicate with each other.
Extend Mode: If the extend mode is enabled, the transmission distance of both power and data will extend up to 250m(10Mbps), this funcation can replace the extender and parts of the Fiber. It will extend the distance of the whole system and save the cost of the project.
Status LEDs Link/Act (steady yellow): link is normal
Link/Act (flashing yellow): data is being forwarded
Link/Act (off): no link
PoE (steady green): the port is powering a powered device properly
PoE (off): the port is not connected to any powered device or is not supplying power
Power (steady green): AC input is normal
Power (off): AC input is abnormal
PoE Port 1 to Port 4 support standard IEEE802.3at/af power( maximum power for each port is 30W),
PoE power type is end-span(12+, 36- and 45+, 78- line pair)
Max PoE capacity: 57.8W
Consumption ≤ 63.7 W
DC voltage 51 V , 1.25A
Operating temperature 0°C-40°C (32°F-104°F)
Operating humidity 10%-90% non-condensing
Storage temperature -40°C-70°C (-40°F-158°F)
Storage humidity 5%-90% non-condensing
Dimensions (W×D×H) 100mm*100mm*26mm
Certification FCC,CE,RoHS
Açıklama İndirme Boyut İndir